Overview

Craig & Rose Artisan Concrete Effect paints will give a high fashion look to your home, it is ideal for creating a feature wall in a bedroom, living room or study. This fantastic paint allows you to achieve the appearance of concrete without the need for actual concrete materials or the associated costs and complexities of installation. Available in Pale Elements and Onyx Edge these decorative effect paints will offer you an effortlessly cool aesthetic.

Craig & Rose developed the Artisan range as a collection of easy-to-use decorative paints, so everyone can create bold and beautiful finishes at home.

• Texture and look of concrete
• Quick recoat time
• Ideal for creative projects
• Creates an architectural feature wall

Preparation

For best results with Craig and Rose Artisan Concrete Effect Paints thoroughly prepare the surface.

• Typically start by preparing the surface by cleaning it and ensuring it is smooth and free from any loose or flaking paint. by sanding with an abrasive paper.
• Fill any holes or cracks with a suitable filler, for walls, we recommend as it is quick and easy to use.
• Seal bare or porous surfaces with .
• Lightly abrade any previously painted surfaces to allow the paint effects to adhere.
• Ensure the surface is clean and free from any dust, dirt, or grease.

Application

It's advisable to test the paint on a small area or sample board before applying it to the entire surface to ensure you are satisfied with the result.

• Stir the paint thoroughly, if using more than one tin combine the Artisan Effect into one container.
• The first two coat can be applied with a synthetic brush and a long pile roller.
• Allow each coat to dry for four hours.
• For the final coat work in small sections and apply using the long pile roller.
• Use a trowel at a 60° to 80° angle and work in sweeping strokes.
• Repeat the process across the entire wall ensuring to keep the trowel clean.
• Apply 3 coats using the same process.
• Applying additional coats will enhance the depth and appearance of the finish.
• Allow the final coat to dry 2-4 hours but no longer than 24 hours, use a 600 grit sandpaper to lightly polish the surface in a circular motion.
• Use the edge of the trowel to further polish the surface, be careful not to gouge the surface with the edge of the trowel.
• For further protection of the finished concrete effect seal the surface with a clear varnish.

It's important to follow the manufacturer's instructions and recommendations when using Craig & Rose Concrete Effect Paint, as application techniques and drying times may vary.