Overview

Cuprinol Wood Preserver Clear is a water based, colourless preserver for interior wood or for exterior use prior to painting, staining or varnishing. It’s formulated to protect sound wood against decay, mould and blue staining fungi.

• Actively prevents rot and decay
• Water based
• Colourless

Preparation

Always ensure the surface to be treated is clean, dry and free from any dust, algae, fungi or moss.

• To clean wood give it a good brush with a stiff brush to remove any dirt, debris or loose wood
• If the wood has been previously stained, painted or varnished, we recommend you strip it back to the bare wood. For previously stained wood use a suitable wood stripper or sandpaper
• If your wood has been effected by algae, fungi or moss this must be removed and can be cleaned with products such as or
• Do not use this product to treat wood destined for in ground contact use

Application

Before applying stir the product thoroughly and test a small area to ensure colour and adhesion. Colours can vary dependent on surface to be treated.

• Apply 2 coats with a brush
• Allow the previous coat to soak in before applying the next coat, reapply before fully dry, usually 2-6 hours under normal weather conditions
• Leave 16 hours for the second coat to dry before painting, staining or vanishing
• Apply only in dry conditions, above 5°C and when bad weather is not forecast

Note: Always follow the manufacturer instructions found on the tin.

Aftercare & Storage

Store any remaining product in dry conditions and protect from frost and sunlight